Home Blog The Giant Vessel That Lifts Entire Oil Platforms Out of the Sea

The Giant Vessel That Lifts Entire Oil Platforms Out of the Sea

TahaSite Editor
Sep 27, 2026
220 Views
The Giant Vessel That Lifts Entire Oil Platforms Out of the Sea

Pioneering Spirit moves under oil platforms with its bifurcated bow and lifts a multi-tens-of-thousands-ton structure out of the sea in one piece.

The North Sea leaves no room for computational or engineering errors. For decades, when the lifespan of a giant oil platform comes to an end, energy companies have faced a logistical challenge: hundreds of workers are sent to work for months on freezing, stormy waters to laboriously dismantle these steel structures piece by piece.

The traditional method of decommissioning oil platforms has always been slow, dangerous, and economically very costly. But imagine that instead of dismantling a skyscraper in the middle of the ocean, a vessel arrives, embraces the entire structure, and lifts a 24,000-ton deck from its supports in less than ten seconds, all in one go.

Audio Summary

Audio summary, created with artificial intelligence

When you look at the Pioneering Spirit ship from a high horizon, the unusual shape of its bow catches your attention before anything else. Instead of the closed tip of typical vessels, a massive slot 122 meters long and 59 meters wide is visible at the front of the ship. This massive opening allows the ship to approach the oil platform from both sides and position its supports within its hull.

Once the oil platform's supports are positioned in the empty space of the bow, sixteen lifting beams slowly move under the upper section of the platform from both sides. The beams take on the weight of the decks, buildings, and multi-tens-of-thousands-ton equipment, holding the entire structure on the ship. TahaSite

The 382-meter hull of the Pioneering Spirit, with a width of 124 meters, was designed to carry out this very operation; however, the colossal dimensions of the Pioneering Spirit only explain a part of the long and detailed work process.

The oil platform sits on a fixed base in the sea, while the ship moves up and down with every wave. The lifting arms must approach the structure with such precision that not the slightest destructive collision occurs, and then transfer its weight from the base to the ship step by step.

Components of a platform; which part becomes the ship's share?

جابه‌جایی سکوی نفتی در دریا

To better understand the Pioneering Spirit's operation, we must first distinguish the main components of an oil platform. The upper part of the platform includes a collection of decks, buildings, staff accommodation, and production equipment; a large structure that sometimes weighs tens of thousands of tons. The platform base is located beneath it and transfers all this weight to the seabed.

In the Brent Delta operation, the Pioneering Spirit removed the upper part of the platform from the base and took it to the shore. The three concrete legs that held the structure at a height above sea level remained in place after the operation. According to the plan, the upper and lower parts were to be collected in two stages via two separate paths.

The bases that keep oil platforms standing differ depending on the type of platform and the installation site. Many platforms sit on a steel, lattice framework that extends from the water's surface to the seabed. Engineers call this structure a jacket.

The bow beams of the Pioneering Spirit are designed to remove the upper part of the platform.

The jacket supports the weight of the platform's topside and withstands wind and wave pressure, transferring these forces to long steel columns called piles, which are driven several meters into the seabed. The bow beams of the Pioneering Spirit are designed to lift the platform's topside.

The Swiss company Allseas, the designer and owner of the vessel, later installed a different device at the stern of the ship so that the steel lattice jackets of the platforms could also be removed from the sea by the same vessel. Therefore, the famous image of the ship carrying a platform between the two sides of its bow shows only a part of its capabilities.

The idea that determined the ship's shape

کشتی پایونیرینگ اسپیریت (Pioneering Spirit) در حال جابه‌جایی سکوی نفتی برنت دلتا در دریا

Before the Pioneering Spirit set sail, decommissioning a large oil platform usually relied on a long series of successive cuts and lifts. The topside of the platform was divided into smaller pieces, and cranes would lower each piece individually.

Piece-by-piece cutting of platforms in the stormy ocean gave way to the single-lift removal of the structure.

Each phase of cutting, connecting, and lifting parts increased the time personnel and equipment spent at sea, where wind, waves, and weather changes could repeatedly halt operations. For this reason, Allseas developed the ship project from the beginning with the idea that the structure should be moved as a single unit.

In the original design, the upper section of the platform would remain as integrated as possible, and the ship would detach it from the base in a single stage and transport it to the shore. In this way, a large part of the dismantling work would be transferred to the more controlled environment of the land. The same method was used in reverse for installing new platforms. The large structure would be completed on shore, placed on the ship, and then seated on the prepared base at sea.

To implement such an idea, the ship had to be built with a completely unique shape and equipment. Pioneering Spirit had to approach the oil platform in such a way that the platform's base would be positioned between the two sides of the bow, and the upper section of the platform would be placed directly above the ship's front opening.

The ship had to maintain its position in that limited space, and the weight of the structure had to be distributed among several different points. The open, bifurcated bow shape was rooted in this very requirement; a different design that allowed the ship's hull to be positioned directly under the platform deck without colliding with the bases.

In addition to the lifting device, engineers had to find enough space for water tanks, multiple thrusters, and pipe-laying equipment, because Pioneering Spirit was not built for just a few lifting missions per year. Between operations, the ship had to weld thousands of meters of pipe together and install them on the seabed. Combining these two different tasks made the interior design and equipment layout a much more complex project.

Stages of ship construction

کشتی پایونیرینگ اسپیریت در حال جابه‌جایی سکوی نفتی برنت دلتا

In 2010, Allseas entrusted the construction of the hull to the DSME shipyard in South Korea, and the first steel plate was cut in 2011. The Finnish company Deltamarin also participated in the detailed design of the ship, and according to reports, up to 300 engineers were working on different parts of the project simultaneously during its peak stages.

The dimensions of the ship presented engineers with an unprecedented challenge from the very construction phase. Since the ship's hull consisted of about a thousand separate blocks, the two sides of the ship were built in separate dry docks and then joined together at the quay. The construction process was influenced by the shape of the bow from the very beginning.

Twelve thrusters pin the 382-meter giant precisely beneath the platform

Pioneering Spirit arrived in Rotterdam in January 2015, but the builders still had another important phase to complete. The main hull was ready, and now sixteen lifting beams had to be installed on the two sides of the slot. According to TahaSite, the ship remained in Alexiahaven until the summer of 2016 for the installation and testing of equipment to be completed.

16 lifting arms were placed on both sides of the ship's bow; eight arms on the starboard side and eight on the port side. Each arm was connected to a set of hydraulic pipes, cylinders, and control equipment. When the ship approaches a platform, the arms retract so they do not interfere with the structure entering the bow slot. After the lower part of the platform is positioned between the two sides of the bow, the arms extend again to go under the platform deck to lift it from below.

Testing the ship's capabilities also proceeded step-by-step. In August 2016, Pioneering Spirit placed the topside of a 5,500-ton test platform onto its jacket. A few weeks later, the ship removed the Yme platform from the sea in its first commercial mission.

The Yme operation was carried out with twelve lifting beams. After returning to Rotterdam, Pioneering Spirit received the remaining four beams, and the bow lifting system reached its full sixteen-beam configuration. Now, for its first commercial operation, the ship had to prepare for the removal of Brent Delta.

Before lifting the platform, the ship must remain in position

کشتی غول‌پیکر پایونیرینگ اسپیریت (Pioneering Spirit) در حال حمل سکوی برنت دلتا
پایونیرینگ اسپیریت سازه بالایی برنت دلتا را در یک عملیات از پایه‌های بتنی جدا کرد و روی عرشه خود نشاندallseas

When Pioneering Spirit approaches a platform, its beams are retracted to leave more space between them and the jacket. Twelve azimuth thrusters beneath the ship propel it forward and adjust its heading. A dynamic positioning system, by controlling these thrusters, helps the ship remain at the designated point.

In the Brent Delta operation, in addition to global positioning references, engineers had installed markers on the platform's jacket so the ship could determine its position relative to the structure more accurately.

Months of study and reinforcement of the jackets were the primary prerequisites for withstanding the pressure at the moment of lifting.

The thrusters can keep the ship in the correct position, but they do not prevent the hull from moving up and down with the waves. This slight movement, when the lifting beams make contact with the stationary platform, could deliver a heavy impact to the structure. For this reason, each beam is equipped with a device that "compensates" for the ship's motion.

The contact section of the beam with the platform can move independently of the hull's motion in several directions. Hydraulic equipment constantly tracks the ship's movement and corrects the beam's position in the opposite direction. As a result, even when the Pioneering Spirit rises and falls on the waves, the point that receives the platform's load remains as stationary as possible.

In the table below, you can see the dimensions and capacities of the Pioneering Spirit.

Slot size of the bow

122 meters long and 59 meters wide

Azimuth thrusters

Lifting capacity of the platform topside

Lifting capacity of the steel jacket

Length of the ship including auxiliary equipment

Brent Delta Operation; Setting an Offshore Lifting Record

کشتی پایونیرینگ اسپیریت (Pioneering Spirit) در کنار یک سکوی نفتی و برج ایفل
The Guardian

The Brent Delta platform, located 186 kilometers northeast of Shetland, was a structure the size of a football field that had served for decades as an oil production plant and accommodation for staff. Engineers now had to transfer the weight of this structure to the ship at several specific points.

All components of Brent Delta were designed to remain on three concrete legs. Now, engineers had to prepare a 24,200-ton structure for a completely different journey: the weight of the topside had to be transferred from several specific points to the ship's beams, and those same points had to withstand the lifting pressure and the sea voyage to the shore.

Allseas designed the connection points for the beams under the deck, and parts of the equipment support frame were also reinforced. Special connections were also placed between the lifting beams and the platform structure to distribute the weight at the designated points. The legs also had to be cut at specific locations to prepare the topside for separation.

During the main operation, wind and sea conditions had to remain within the specified limits.

On the day of the platform lift, wind and sea conditions had to remain within the specified limits. The operation plan included checking the weather forecast and testing positioning equipment, water tanks, and the lifting device. After completing the leg-cutting phase, the personnel left the platform so that no one would be in the operation zone when the Pioneering Spirit arrived.

The vessel moved forward slowly with its beams retracted and positioned the three concrete legs into the slot at its bow. Once the position was stabilized, sixteen lifting beams moved from both sides of the vessel to underneath the deck. Each pair of beams placed a special connection piece under one of the prepared points. The motion compensation system also maintained contact between the piece and the platform while the vessel was swaying. Then it was time for the weight transfer.

The Pioneering Spirit uses large tanks that are filled and emptied with seawater to change its draft. Before moving under the platform, the vessel fills a portion of the tanks to become heavier and sink lower in the water. After the beams are connected, the water in the tanks is gradually discharged, and the hull rises.

The Pioneering Spirit vessel can submerge between 10 and 27 meters in the water. In the Brent Delta operation, the gradual rising of the vessel caused almost the entire weight of the topside to be transferred from the legs to the lifting beams before the final rapid movement.

The operation had to proceed at a speed that would move the structure out of the danger zone before the arrival of the next wave.

Now the structure was resting on the beams, but the distance to the supports was small, and a wave could have slammed the ship back into the structure. In the final stage, the hydraulic lift had to move the upper section upward at speed to create a safe distance between the two parts of the platform. Everything had to proceed at a pace that would move the structure out of the danger zone before the next wave returned.

On the morning of April 28, the rapid separation phase took only ten seconds. The footage of the operation shows the ship entering beneath the platform, the beams being adjusted, and then moving away with the massive structure on its bow; this operation set the record for the heaviest offshore lift of its time.

Cargo delivery in shallow waters; the arrival of the Iron Lady

کشتی پایونیرینگ اسپیریت (Pioneering Spirit) در حال جابه‌جایی سکوی نفتی در دریا

After the platform was lifted, the beams and connections were secured for the journey, and the ship carried the cargo toward the English coast. But near the destination, nature presented a new challenge. The water near the scrapyard was not deep enough for a vessel with the draft of the Pioneering Spirit to dock.

Engineers had designed a large cargo barge named Iron Lady, 200 meters in length, to fit into the slot of the ship's bow. In the waters near the shore, the barge slid under the platform, and the Brent Delta operation was repeated in reverse.

A vessel named "Iron Lady" slid under the ship's bow to carry the structure on its shoulders for the final transfer.

The crew changed the height of both vessels by emptying the water tanks, so that the weight of the platform was transferred from the ship's shoulders to the barge. After the indicators confirmed the complete transfer of the load, the ship's arms retracted, and tugboats pulled the Iron Lady with its 24,000-ton cargo out from the heart of the ship. TahaSite

When the float reached the pier, the tide became stronger, and there was a risk of the platform losing its balance. However, by constantly adjusting the tanks, the engineers kept the float's height stable so that the structure could slide onto the prepared path toward the land.

Finally, in February 2019, the Brent Delta mission came to an end; 97 percent of the platform's weight was recycled or returned to the consumption cycle. The structure, which the engineers had insisted on pulling out of the sea in one piece, was ultimately dismantled safely and calmly on land.

Hunting the Jackets; Grasping the Depths of the Ocean

کشتی پایونیرینگ اسپیریت (Pioneering Spirit) در حال عملیات در دریا

After beginning its operations, Pioneering Spirit was also equipped with another device for extracting steel jackets. Two large arms, approximately 170 meters long, were placed at the stern of the ship to lift the lattice structures that extend from beneath the platform to the seabed.

After the connection between the jacket and the steel piles on the seabed was cut, the cables and hooks of these arms gripped the top of the structure. The aft jacket lift system pulls the structure out of the water with stunning power, changes its angle, and lays it flat on the deck for transport. Allseas states the capacity of this device is 20,000 tons.

In April 2022, the stern system extracted the Ninian Northern steel jacket from the water for the first time; a structure weighing 8,100 tons and standing 85 meters tall. The ship had removed the topside of the same platform two years earlier. Of course, the flow of the famous Brent Delta mission seemed difficult from other angles, as the platform's legs were made of concrete, and in 2017, the ship only managed to remove the topside.

Reverse Engineering; From Dismantling Rigs to Installing Wind Platforms

کشتی پایونیرینگ اسپیریت در نخستین مأموریت تجاری
یونیرینگ اسپیریت در سال ۲۰۱۶ سکوی یمه را در نخستین ماموریت تجاریِ بالابری سنگین خود یک‌جا از دریا برداشتallseas

Pioneering Spirit performs the same operation in reverse to install a new platform. The vessel carries the topside of the platform on its lifting beams, positions it over the prepared jacket, and then gently lowers the structure.

The motion compensation system, which prevented impact when removing the structure, comes into play here as well to place the heavy structure onto its supports without any damage. This capability has taken Pioneering Spirit beyond the world of oil and gas and into the realm of renewable energy.

In 2022, the Pioneering Spirit vessel installed the massive DolWin kappa converter platform in the German North Sea. The weight of the project's jacket reached 5,000 tons, and its topside weighed 11,000 tons, housing the power conversion equipment for offshore wind farms. The vessel even used its large crane to drive the foundation piles into the seabed, demonstrating that it is a complete workshop for offshore infrastructure construction.

Floating Factory; Pipelaying in the Darkest Depths

کشتی جابه‌جایی سکوهای نفتی با بدنه بزرگ و دو بازوی موازی
The Educated Monkey

Between platform removal missions, the Pioneering Spirit vessel transforms into a floating factory for the construction and installation of pipelines. Steel pipes are placed on the deck and then enter a production line that welds the segments together, inspects the welds, and applies a protective coating to the joints. At the end of this path, the continuous pipe exits the vessel and gradually reaches the seabed.

Allseas says the vessel houses one pipe-production unit and six welding stations, with a carrying capacity of 27,000 tons of pipe. Such capacity allows the welding and installation process to continue on deck for extended periods.

However, the most difficult part of the work begins at the end of the deck. The pipeline built on the vessel may extend for kilometers, with a portion of it remaining suspended between the vessel and the seabed. Four machines, resembling large crawler tracks, control the pipe as it exits the vessel. The total tension capacity of these machines reaches 2,000 tons.

Amidst the relocation of platforms, the vessel welds thousands of meters of steel pipe and sends them to the seabed.

The tension of the machines must be precisely adjusted, as too little force increases the curvature of the pipe, while too much pressure damages it. The pipe enters the water from the end of the vessel at a controlled angle and slowly descends toward the seabed.

The capability of the Pioneering Spirit was clearly demonstrated in the TurkStream project. The vessel installed 32-inch diameter pipes in parts of the Black Sea where the water depth exceeded 2,200 meters. At such depths, the tension of the line, the movement of the vessel, and the bending shape of the pipe must be monitored moment by moment.

If the fury of nature and storms halt the work, the team cannot leave the pipe hanging from the back of the vessel. The "abandon and recovery" system immediately seals the end of the pipe and lowers it to the seabed with steel cables. Once the weather calms, the vessel returns, retrieves the pipe end from the depths, and welding continues from that same point.

Battle of the Titans; Hydraulic Lift vs. Traditional Cranes

کشتی عظیم پایونیرینگ اسپیریت (Pioneering Spirit) در حال حمل یک سکوی نفتی در دریا
پایونیرینگ اسپیریت برای جابه‌جایی سازه‌هایی ساخته شده که معمولا به چندین عملیات جرثقیل و شناور پشتیبان نیاز دارندallseas

To better understand the lifting capacity and unique mechanism of Pioneering Spirit, we can compare it with Sleipnir, one of the world's largest crane vessels; a semi-submersible vessel operated by Heerema that transports and installs massive offshore structures.

Sleipnir features two 10,000-tonne revolving cranes, and when operating together, they can lift a 20,000-tonne load. However, Pioneering Spirit fundamentally does not operate like conventional cranes, although it does have a 5,000-tonne crane on its deck for auxiliary tasks.

In offshore engineering, the single-piece lift method from beneath the structure competes with the traditional cable crane method.

The two vessels utilize two different methods for lifting loads. Sleipnir's cranes hook the load from above and move it through the air, whereas Pioneering Spirit's lifting beams slide beneath the structure, distributing the platform's total weight across them. The lifting capacity of this system reaches up to 60,000 tonnes.

Of course, a higher lifting capacity does not mean that Pioneering Spirit is the more suitable option for every mission. Operating with cranes, Sleipnir offers greater flexibility for lifting and moving various components. The specific conditions of each project, structural integrity, and foundation architecture determine which of these two methods is more effective for operations amid the waves.

A Decade of Power: A Hundred-Thousand-Tonne Legacy

کشتی حمل سنگین پایونیرینگ اسپیریت (Pioneering Spirit) در میان اقیانوس
allseas

The Brent Delta mission marked the beginning of a series of major lifts by Pioneering Spirit. In the following years, the vessel removed three other topsides from the Brent field platforms and transported them to shore. In July 2024, by lifting the 31,000-tonne Brent Charlie deck, the vessel broke the record for the heaviest offshore lift in history, bringing the total weight extracted from the Brent field to nearly 100,000 tonnes.

The vessel's operational record is not limited to dismantling old platforms. Pioneering Spirit has installed new platforms, removed various steel jackets from the seabed, laid thousands of meters of pipelines, and transported power transmission structures for wind farms.

On the morning of the Brent Delta mission, after a ten-second lift, Pioneering Spirit slowly moved away from the three concrete legs. The topside of the platform rested on the vessel's beams, leaving a large void above the legs where the structure had stood for decades.

The photograph remaining from that moment demonstrates the power of Pioneering Spirit better than any statistic; an image of a 24,000-tonne platform that was once a permanent part of the North Sea and was now heading toward the shore on the bow of a ship.

سکوی نفتی غول‌پیکر روی ستون‌های فلزی در میان آب‌های دریا
کشتی پایونیرینگ اسپیریت
allseas
کشتی پایونیرینگ اسپیریت (Pioneering Spirit) در حال جابه‌جایی سازه در دریا
لوله پس از عبور از خط تولید روی کشتی، از سازه‌ی نگهدارنده خمیده‌ای به نام «استینگر» به سوی بستر دریا هدایت می‌شودallseas
کشتی پایونیرینگ اسپیریت در حال نصب خط لوله در دریا
پایونیرینگ اسپیریت علاوه بر جابه‌جایی سکو، یک کارخانه شناورِ اتصال و نصب خط لوله در دریاستallseas
کشتی نیمه‌شناور اسلیپنیر (Sleipnir) با جرثقیل بزرگ در آب
Sleipnir با دو جرثقیل بزرگ کار می‌کندheerema
کشتی نصب سکو (Pioneering Spirit) در حال جابه‌جایی یک سکوی نفتی در دریا
همان تجهیزات بالابر، در پروژه‌ی دال‌وین کاپا برای نصب سازه‌های یک ایستگاه برق فراساحلی به کار رفتندallseas
Tags:
Pioneering Spirit oil platform removal offshore engineering heavy lift vessel North Sea
TahaSite

TahaSite

Since childhood, I have always been fascinated by computers and technology. My passion for programming and web development has driven me to constantly learn and create. At TahaSite, my goal is to provide the latest tech insights and build cutting-edge software infrastructure.

Comments

No comments yet. Be the first!