Home Blog How Autumn Leaves Stop Heavy Trains and Why Engineers Spray Water on Rails

How Autumn Leaves Stop Heavy Trains and Why Engineers Spray Water on Rails

TahaSite Editor
Nov 08, 2026
195 Views
How Autumn Leaves Stop Heavy Trains and Why Engineers Spray Water on Rails

تمام وزن لوکوموتیو روی سطحی به‌اندازه ناخن تکیه دارد؛ جایی که واکنش شیمیایی برگ و فولاد، اصطکاک چرخ را به صفر نزدیک می‌کند.

اکتبر ۲۰۲۲، قطاری باری با صدها تن وزن ناگهان در مسیر ترنس‌پناین، یکی از پرترددترین خطوط ریلی بریتانیا متوقف شد. نه موتور از کار افتاده بود، نه سیستم ترمز نقص فنی داشت و نه صخره یا درختی مسیر را می‌بست، مقصر فقط برگ‌های پاییزی بودند.

ریل زیر چرخ‌های قطار چنان لغزنده شد که لوکوموتیو دیگر توان جلو رفتن نداشت و ۹ ساعت تمام طول کشید تا گروه‌های امدادی مسیر را پاک‌سازی کنند و قطار را دوباره به راه بیندازند.

در نگاه اول، ماجرا بیشتر به یکی از بهانه‌های شرکت‌های راه‌آهن برای توجیه تأخیر قطارها شباهت دارد. چطور چرخ‌های فولادی در برابر چند برگ متوقف می‌شوند؟ همان‌طور که حدس می‌زنید، خود برگ‌ها نیروی خاصی ندارند، همه‌چیز به اتفاقی مربوط می‌شود که در فاصله بسیار کوچک میان چرخ و ریل رخ می‌دهد؛ جایی که لایه‌ای نازک از مواد گیاهی می‌تواند رفتار یک دستگاه عظیم را تغییر دهد.

نتورک ریل، نهاد مسئول زیرساخت راه‌آهن بریتانیا، ماجرای قطار اکتبر ۲۰۲۲ را به‌عنوان نمونه‌ای از پیامدهای کاهش چسبندگی ثبت کرد. این دردسر هر پاییز در شبکه‌های ریلی تکرار می‌شود و برای مقابله با آن قطارهای ویژه به راه می‌افتند تا با آب‌پاش‌های پرفشار و مواد اصطکاک‌افزا مشکل را حل کنند.

اما در کنار این نبرد سنگین، پژوهشگران به راه‌حلی رسیده‌اند که با تمام شهود و منطق روزمره ما تضاد دارد، گاهی برای مهار ریلی که به‌خاطر رطوبت و برگ لیز شده، تنها باید کمی آب بیشتر روی آن بریزیم!

برگ پاییزی چگونه به «تفلون سیاه» تبدیل می‌شود؟

Leaves do not always fall directly from tree branches onto the tracks; sometimes, when a train speeds by, the surrounding airflow lifts fallen leaves from the wayside and drags them onto the rail surface. A moment later, the steel wheels arrive, crushing the leaf tissue under immense pressure.

Subsequent trains then pass over the leaf remnants, and after a few passes, a dark, thin, and hard layer remains on the upper part of the rail. This dark coating is not merely leaf pulp; the organic compounds of the leaf, including cellulose, lignin, and pectin, undergo a chemical reaction with the iron on the surface of the steel rail under the extreme pressure and temperature caused by passing wheels, creating a substance that adheres tightly to the steel.

This black crust may be only a fraction of a millimeter thick, but it virtually eliminates the friction between the wheel and the rail. Railway engineers often compare the behavior of this coating to "Teflon," because as soon as it gets slightly wet, it creates a surface so polished and slippery that the wheels slide right over it.

Train wheels turn leaves into a black, hard, and slippery coating

In a study published in the journal RSC Advances, scientists were able to replicate a friction-reducing substance in a laboratory environment by combining leaf extract and rail steel. Although the chemical details of the process are not yet fully understood, its real-world consequences are painfully obvious.

Once the layer is formed, the problematic agent almost disappears from view. A passenger looking out the train window might see a seemingly clean track free of leaves, unaware that the train is gliding over an invisible, slippery carpet.

Leaf transformation solves the apparent paradox of the situation. The train is not facing a mass of soft leaves; its own wheels have turned them into a dense, slippery coating. However, the effect of the black coating also depends on the exact contact point between the wheel and the rail.

The entire weight of a steel giant on a coin-sized surface

To see how a thin layer can paralyze a multi-ton train, we need to zoom in on the intersection point of the wheel and the rail. Unlike a car's rubber tire, which flattens slightly under the vehicle's weight and maintains a large contact patch with the asphalt, a steel train wheel contacts the rail in only a very small area. This zone, known as the Contact Patch, is typically about one to two square centimeters in size—roughly the size of a fingernail.

A significant portion of the train's weight is transferred to the track through these tiny areas, and the localized pressure can reach hundreds of megapascals or even more. However, high pressure alone does not propel the train forward. The engine must transfer its force to the rail through this very spot, and during braking, this same small contact must reduce the train's speed.

A clean and dry rail provides a proper balance for the train's movement. Steel-on-steel contact has low rolling resistance, allowing the train to move massive loads with relatively low energy; at the same time, friction remains sufficient for acceleration and stopping.

The engine and braking force pass through a surface roughly the size of a fingernail.

The leaf layer disrupts this balance because the loss of adhesion at the contact point causes the wheel to spin in place when starting to move, and to slide on the rail during braking without reducing the train's speed. In such moments, the engine and brakes are working, but the bridge that should transfer their force to the ground has collapsed.

Even a heavier train does not help solve the issue. Although more weight presses the wheel more firmly against the rail and increases friction capacity, it simultaneously creates much greater mass, which requires significantly more force to accelerate or stop.

In the simplest physical model, both effects are directly related to mass, and for this reason, high weight does not guarantee that the train will have better braking performance in slippery conditions.

On a clean, dry rail, the coefficient of friction is usually in the approximate range of 0.3 to 0.4. Severe contamination can reduce the coefficient of friction to less than 0.05, and tests related to the leaf layer have even recorded values close to 0.01; a slipperiness that is sometimes compared to the contact between a skate blade and ice.

The leaf layer does not take away the train's power; it disrupts its transmission path.

In such a situation, the train stalls on the slightest incline or requires a much longer distance to come to a stop. Sometimes the consequences of this disruption go beyond long delays, such as in October 2024, when a passenger train near Talerddig, Wales, overshot its designated stopping point by about 1080 meters and collided with another train. One person lost their life in the accident.

The final investigation report, published in June 2026, cited reduced adhesion, malfunctioning sand-spraying systems, and the train's speed as it approached the station as the main factors contributing to the accident; a painful incident that may not have been caused solely by leaves on the tracks, but demonstrated just how much stopping distance increases when even a small wheel-rail contact is lost.

Why morning dew can be more dangerous than heavy rain

قطار باری سنگین در حال حرکت روی ریل‌های آهنی میان درختان پاییزی
Wikimedia Commons

Autumn leaves cause trouble even when dry, but it might seem surprising that the most hazardous conditions do not occur during heavy downpours; sometimes, a few drops of morning dew or a light drizzle after several days of dry weather creates a situation far worse than continuous rain.

Dew can make the leaf layer more slippery than continuous rain

The slight morning moisture mixes with leaf residue, iron oxides, and dust on the track, creating a soap-like, highly slippery paste. From a distance, the rail only looks slightly damp, but in practice, it turns into a slick trap. At the exact small surface area of contact with the rail, the train wheel encounters a layer with very little friction and slip resistance.

Years of testing have shown researchers that the slippery paste on the rails reaches its peak danger only at a specific amount of moisture. While a little water can make the dark layer on the rail extremely slippery, once the water exceeds a certain threshold, the structure of the layer breaks down, its viscosity drops, and as the wheels pass over, it is gradually washed and separated from the rail surface.

In fact, a completely wet rail may have more adhesion than one with just morning dew on it. A study by the University of Sheffield, published in March 2026, showed that the amount of water within the leaf layer itself explains the drop in adhesion much better than the relative humidity of the air.

The amount of water in the layer itself indicates the danger better than air humidity

Rail temperature, air temperature, and pollution levels determine how much water accumulates in the layer; therefore, weather reports and humidity percentages alone are not accurate criteria for predicting the risk of rail slipperiness. Even on days when the weather appears favorable, the temperature difference between the cold steel rail and the surrounding air causes condensation and moisture absorption within the leaf layer, causing adhesion to suddenly plummet.

The non-linear behavior of water led British engineers in the 1970s to a counterintuitive experiment. If a little moisture was dangerous, perhaps they shouldn't dry the rails; perhaps they should pour more water on them.

The counterintuitive solution: Add water to the slippery rail!

In everyday experience, if a kitchen floor gets wet and slippery, no sane person would pour another glass of water on it to prevent slipping. But the physics of wheel-rail contact follows its own rules; when the thick paste created by "low moisture" is the main culprit of slipperiness, adding more water tips the equation in favor of the train.

In 1979, British railway engineers at Bearsted Bank, near Maidstone, deliberately wetted a section of the track to compare the results with other sections. Adhesion improved in the wetted section and the result seemed promising, but installing tanks and sprinkler equipment along the railway lines was costly and complex, and the idea was shelved for decades.

Decades later, the equipment's location was changed; instead of installing the sprinkler system next to the track, the tank, pump, and nozzles were placed under the train itself. The result of this research path was the Water-Trak technology; a system that does not wash the rail with high pressure, but sprays a controlled amount of water on it just before the next wheels arrive.

Unlike giant cleaning trains that scrub the rail with 1500 bar pressure, Water-Trak's goal is not to physically wash away leaves; instead, it tricks the chemistry of the rail surface. The Water-Trak system is connected to the wheel slip control system, and when the front wheels detect slippage, the nozzles spray a very precise amount of water on the rail before the next wheels arrive.

Water-Trak restores some braking power with just a few milliliters of water

According to the technology's developers, just one to four milliliters of water per meter of rail can increase adhesion under the right conditions; an amount less than a teaspoon per meter.

The tiny amount of water being sprayed is not meant to strip the black layer from the steel like a washing machine; it merely changes the track conditions from the worst moisture range, altering the behavior of the black layer. Subsequent wheels roll over a surface whose condition resembles wet tracks on a rainy day much more than dew-covered rails.

The Water-Trak technology was tested on Northern passenger trains in 2021 and 2022, and according to a Network Rail report, the stopping distance of two electric trains equipped with the system under low adhesion conditions decreased by more than 12 percent.

Of course, engineers emphasize that the twelve percent rate refers to the conditions of that specific test, and the technology may not yield the same result for all routes or all types of contamination. Nevertheless, the test demonstrated that adding water can, contrary to expectations, restore part of the braking capacity.

Railway's Autumn Army; Track Washing with 1,500 Bar Pressure

دستگاه شستشوی ریل با پاشش آب روی مسیر ریلی در جنگل

Water-Trak technology does not replace cleaning trains. In countries like Britain, the railway network dispatches special vehicles to the tracks every autumn, pulling water tanks and powerful pumps, spraying water onto the rails at extremely high pressure.

The main weapon of the cleaning trains is water jets targeted at the upper edge of the rail. According to reports, the water pressure at the nozzles reaches a staggering 1,500 bar—a pressure high enough to strip the hard, black layer of leaves from the steel.

According to reports, the pressure of these systems reaches about 1,500 bar to strip the hard leaf coating from the steel. After washing, where necessary, they spray a gel containing sand and metal particles onto the rail to increase friction. The sand grains create roughness and friction under the wheels, while the metal particles maintain the electrical connection between the train and the rail.

High-pressure water strips the leaf layer; Water-Trak changes its behavior

The presence of metal particles in the gel addresses one of the hidden and lesser-known dangers of autumn leaves. On many rail lines, smart systems detect the presence of a train in a section and turn the signals red through a weak electrical current that enters a rail, passes through the train's wheels and axle, and reaches the other rail.

The black layer of leaves sometimes acts like an insulator, breaking the electrical connection—an occurrence that, in engineering terms, makes the train invisible to track detection systems!

The difference in scale between the high-pressure water system and the Water-Trak technology is quite fascinating. The first method requires a pressure of 1,500 bar to strip the layer, while the second method uses just a few milliliters of water to change the behavior of that exact layer at the moment the train passes. The former cleans the rail surface, while the latter helps the train achieve better grip before complete cleaning takes place.

Nature, however, does not wait for cleaning trains. Perhaps an hour after the cleaning train passes, an autumn wind will drop thousands of fresh leaves onto the rail again, and subsequent trains will recreate that same black layer. This very limitation caused engineers, instead of relying solely on washing the entire network, to equip passenger and freight trains themselves as a weapon to alter the behavior of the rail.

From Dry Ice to Lasers: 21st-Century Weapons Against Autumn Leaves

The engineers' battle against autumn leaves is now being fought in high-tech laboratories. In September 2025, Northern began testing an innovative technology called Cryogrip, which blasts dry ice particles onto the rails with a high-speed airflow.

The impact of the dry ice freezes, makes brittle, and shatters the black leaf residue, and because dry ice sublimates into gas immediately upon impact, it leaves no moisture on the rails. Researchers are still pursuing better ways to solve the autumn leaf problem, with other methods utilizing leaf-degrading chemicals or laser cleaning.

Despite all the solutions, high-pressure trains, computerized brakes, and innovative technologies, autumn still puts rail networks on high alert.

Autumn leaves do not have the physical strength to stop a train weighing hundreds of tons; they merely sever the contact bridge between the wheel and the rail. The strange story of the leaf and the train shows that the fate of giant human-made machines is sometimes decided by a layer a fraction of a millimeter thick—a layer that might require 1,500 bar of pressure to remove, yet is sometimes tamed by less than a teaspoon of water.

From Other Members of the TahaSite Family

چرخ فلزی قطار در حال حرکت روی ریل‌های آهنی
Water-Traknetworkrail

The Best Chinese Rival to Rolls-Royce; BYD Yangwang U8 Introduced

From the Secret of Making the Film Red to the Controversies Surrounding Elnaz Shakerdoust's Presence

نمودار مقایسه میزان چسبندگی چرخ قطار در سه حالت خشک، مرطوب و خیس

The Engineering Secret of Isfahan's Menar Jonban; Why Do the Two Brick Towers Shake Together? - Kojas

The 14 Million Toman Difference Between Two Methods of Receiving a 100 Million Toman Loan

مقایسه نیروی کشش و ترمز چرخ قطار روی ریل‌های خشک، بارانی و پوشیده از برگ

XPeng P7 Electric; Specifications and Price of the Imported Super Sedan in Iran

Best Netflix Series of 2026; From Drama to Thriller

چرخ قطار و ریل با لایه‌ای از برگ‌های پاییزی در سطح تماس

BYD Yangwang U9 Hypercar Breaks Speed Record at 500 km/h!

Best Chinese Movies of 2026 + IMDb Scores - Filmzi

بقایای فشرده برگ‌های پاییزی روی سطح فلزی ریل قطار
sagepub

Why These 16 Popular Movies Were Never Made

Demolition of One of Tehran’s Modern Architectural Jewels in Amjadieh Neighborhood

برگ پاییزی سیاه شده روی سطح ریل قطار و مواد چسبنده
برگ نیمه‌له‌شده روی ریل؛ بخش میانی برگ که در مسیر عبور چرخ قرار گرفته، به ماده‌ای سیاه و خمیری تبدیل شده است.sagepub

Trump: No Immediate Plans for an Attack on Iran

Engine-less and Gear-less Machine; A Masterpiece of Traditional Iranian Engineering

قطار بخار در حال حرکت روی پل ویلیام گیل (Glenfinnan Viaduct) در میان کوه‌های مه‌آلود
unsplash

Fateful Hours for Trump; Is the Balance of Power in Washington Shifting?

Is Call of Duty: Modern Warfare 4 Worth Buying? Comprehensive Game Review

50 Horror Movies Chosen by Great Cinema Directors | From Tarantino to Scorsese - Filmzi

Tags:
autumn leaves and trains wheel rail friction train stopping physics railway engineering slippery rail problem
TahaSite

TahaSite

Since childhood, I have always been fascinated by computers and technology. My passion for programming and web development has driven me to constantly learn and create. At TahaSite, my goal is to provide the latest tech insights and build cutting-edge software infrastructure.

Comments

No comments yet. Be the first!